Prof. dr. Mirko Soković:

• SANTOŠI, Željko, ŠOKAC, Mario, KOROLIJA CRKVENJAKOV, Danijela, KOSEC, Borut, SOKOVIĆ, Mirko, BUDAK, Igor. Reconstruction of 3D models of cast sculptures using close-range photogrammetry. Metalurgija, ISSN 0543-5846, 2015, vol. 54, no. 4, str. 695-698. [COBISS.SI-ID 1525855].
• DJUROVIĆ, Dušan, BULATOVIĆ, Miodrag, SOKOVIĆ, Mirko, STOIĆ, Antun. Measurement of maintenance excellence. Tehnički vjesnik, ISSN 1330-3651, Oct. 2015, vol. 22, nr. 5, str. 1263-1268, doi: 10.17559/TV-20140922094945. [COBISS.SI-ID 14304027],
• KARKOSZKA, Tatiana, SOKOVIĆ, Mirko. Risk based on quality, environmental and occupational safety in heat treatment processes. Metalurgija, ISSN 0543-5846, 2014, vol. 53, no. 4, str. 545-548, [COBISS.SI-ID 13473563].
• BUDAK, Igor, VUKELIĆ, Djordje, BRAČUN, Drago, HODOLIČ, Janko, SOKOVIĆ, Mirko. Pre-processing of point-data from contact and optical 3D digitization sensors. Sensors, ISSN 1424-8220, 2012, vol. 12, no. 1, str. 1100-1126. [COBISS.SI-ID 12177691].
• BUDAK, Igor, SOKOVIĆ, Mirko, BARIŠIĆ, Branimir. Accuracy improvement of point data reduction with sampling-based methods by fuzzy logic-based decision-making. Measurement, ISSN 0263-2241. [Print ed.], Jul. 2011, vol. 44, iss. 6, str. 1188-1200, doi: 10.1016/j.measurement.2011.03.026.  [COBISS.SI-ID 11859227].

Celotna bibliografija

Doc. dr. Davorin Kramar:

• KRAMAR, Davorin, CICA, Djordje, SREDANOVIĆ, Branislav, KOPAČ, Janez. Design of fuzzy expert system for predicting of surface roughness in high-pressure jet assisted turning using bioinspired algorithms. Artificial intelligence for engineering design, analysis and manufacturing, ISSN 0890-0604. [Print ed.], 2015, str. 1-11, ilustr., doi: 10.1017/S0890060415000189. [COBISS.SI-ID 14081307]
• ENIKO, Peter, KRAMAR, Davorin. Optimiranje tehnologije izdelave v redni proizvodnji. Ventil, ISSN 1318-7279, dec. 2015, letn. 21, št. 6, str. 462-[468], ilustr. [COBISS.SI-ID 14403355]
• SEKULIĆ, Milenko, KOVAČ, Pavel, GOSTIMIROVIĆ, Marin, KRAMAR, Davorin. Optimization of high-pressure jet assisted turning process by Taguchi method. Advances in production engineering & management, ISSN 1854-6250, 2013, vol. 8, no. 1, str. 5-12, ilustr. [COBISS.SI-ID 12994843]

Celotna bibliografija

Asistent Luka Čerče, univ. dipl. inž.:

• ČERČE, Luka, PUŠAVEC, Franci, KOPAČ, Janez. 3D cutting tool-wear monitoring in the process. Journal of mechanical science and technology, ISSN 1738-494X, Sep. 2015, vol. 29, iss. 9, str. 3885-3895, ilustr., doi: 10.1007/s12206-015-0834-2. [COBISS.SI-ID 14193947]
• ČERČE, Luka, PUŠAVEC, Franci, KOPAČ, Janez. A new approach to spatial tool wear analysis and monitoring. Strojniški vestnik, ISSN 0039-2480, Sep. 2015, vol. 61, no. 9, str. 489-497, ilustr., doi: 10.5545/sv-jme.2015.2512. [COBISS.SI-ID 14181403]
• ČERČE, Luka, KOPAČ, Janez. Preverjanje natančnosti obdelovalnih strojev. Vzdrževalec, ISSN 1318-2625, 2011, letn. 36, št. 141/142, str. 49-51. [COBISS.SI-ID 12101403]

Celotna bibliografija